Skip to content
JINGUAN JINGUANHEAVY-DUTY FILTRATION
Buyer Guides

Scania Super DC13 Oil Filter: 2824017, 2824018 and HU 10 004 z

Check Scania Super DC13 oil filter references, catalogue dimensions and specific engine applications before ordering for the Brazilian market.

Published 2026-11-04 1 views Cumulative since 2026-11-04; earlier visits may not be included.
Concept illustration of a heavy-duty truck and oil filter theme for the Scania Super DC13 reference guide; not a vehicle or product photograph

Scania OE numbers 2824017 and 2824018 are listed against MANN-FILTER HU 10 004 z. The catalogue includes specific Scania Super DC13 applications, but that does not make this filter suitable for every Scania 13-litre engine.

For distributors supplying the Brazilian market, this is a useful reference to identify separately from older Scania filter stock. The starting point is the engine code and existing OE number—not just “Scania R-series” or the horsepower badge.

Why This Matters for the Brazilian Market

Scania presented its Super 13-litre range in Brazil at Fenatran 2022, announcing deliveries from February 2023. The range included 420, 460, 500 and 560 cv versions.

The launch retained the existing cab families while introducing a new powertrain. A familiar-looking truck can therefore require a different parts check from an earlier vehicle carrying the same cab-series name.

For a Brazilian enquiry, use the VIN or engine identification to establish the configuration. The application examples below are manufacturer catalogue entries, not a blanket fitment list for every locally supplied truck.

Oil-Filter References and Dimensions

MANN-FILTER publishes the following information for HU 10 004 z:

Identification itemPublished reference or dimension
Scania OE references2824017 / 2824018
MANN-FILTER referenceHU 10 004 z
Outer diameter — A100 mm
Inner diameter — B14 mm
Additional outer diameter — D100 mm
Height — H220 mm
Reference chart of Scania OE 2824017 and 2824018, MANN-FILTER HU 10 004 z and catalogue dimensions; not Jinguan measured specifications

These measurements describe the MANN-FILTER reference product. Use them to compare identification details with a supplier’s drawing, not as a substitute for checking the engine application.

The two Scania numbers appear under the same aftermarket reference. That listing does not, by itself, establish that 2824018 is a later revision or upgrade of 2824017. Keep the number supplied by the customer on the enquiry rather than changing it based on numerical order.

Which Engines and Trucks Are Listed?

The catalogue includes these application examples:

Engine codeListed model examples
DC13 176G 420, P 420, R 420, S 420
DC13 175G 460, P 460, R 460, S 460
DC13 173G 560, R 560, S 560

The 500-series entries need closer attention. The catalogue groups several engine codes together, including DC13 174, and adds a DC 13 Super qualification. Do not turn that grouped entry into an unrestricted “fits all Scania 500” claim.

For a mixed fleet, record the engine code beside each vehicle rather than placing all 13-litre trucks under one filter reference.

Is This an Upgrade for Older Scania Engines?

Not simply because it appears in Super applications.

Treat HU 10 004 z and its listed OE references as application-specific service parts. An older engine should not receive this element merely because the truck has similar power or belongs to the same cab family.

The catalogue establishes references, dimensions and selected applications. It does not provide a before-and-after test showing that this element offers a particular improvement in filtration efficiency, dirt capacity or service life over an older Scania filter.

Likewise, the Super powertrain’s efficiency improvements should not be presented as benefits delivered by this oil filter alone.

This article concerns the Super DC13 applications identified above. It does not establish compatibility with the newer Super 11-litre engine.

What to Check on the Product Being Quoted

Once the engine and reference are confirmed, ask the supplier for the proposed product’s dimension sheet and clear photographs of both ends.

Compare the element’s overall geometry, connection details and sealing arrangement. Specify which replacement seals must be included instead of assuming that every quotation covers the same contents.

For a first bulk purchase, agree on the sample-approval requirements before production. Physical-fit approval and filtration-performance evidence are separate checks; an element fitting into the housing does not establish its efficiency or an extended replacement interval.

Use the maintenance schedule applicable to the vehicle, lubricant and operating conditions. Do not adopt a longer interval solely because a replacement is advertised for a newer platform.

Prepare a Clear Enquiry

Send the VIN or engine code, the existing OE number and a readable photograph of the old filter label. Add the required quantity, destination country and packaging requirements.

A useful enquiry line is:

Oil filter enquiry: Scania OE 2824017 / 2824018, reference HU 10 004 z. Engine code: [insert]. Please confirm application, dimensions, included seals and availability.

For enquiries to JINGUAN, provide these details so the requested application and supply options can be checked before quotation.

Brand names and reference numbers are used for identification and comparison only. They do not imply original-equipment affiliation or confirmed stock availability.

Find the Right Filter

Send OE number, current part number, dimensions, photo, application and quantity for a practical replacement check.